Physical properties tests archivos - CEISLAB https://www.ceislab.com/en/tag_ensayos/physical-properties-tests/ Evaluación de la conformidad y realización de ensayos relacionados con la calidad. Wed, 12 Jan 2022 19:54:47 +0000 en-GB hourly 1 https://wordpress.org/?v=7.0.2 https://www.ceislab.com/wp-content/uploads/2024/10/cropped-ceisLAB_Chico-32x32.png Physical properties tests archivos - CEISLAB https://www.ceislab.com/en/tag_ensayos/physical-properties-tests/ 32 32 Dichloromethane resistance at specified temperature (DCMT) https://www.ceislab.com/en/ensayos/dichloromethane-resistance-at-specified-temperature-dcmt/ Thu, 18 Nov 2021 13:57:57 +0000 /?post_type=ensayos&p=4210 Test methods A sample (pipe) is submerged for 30m in dichloromethane at a specified temperature to check that the material is not affected at that temperature. Products to test Plastics piping systems for civil works for water in: Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized […]

La entrada Dichloromethane resistance at specified temperature (DCMT) se publicó primero en CEISLAB.

]]> Test methods

A sample (pipe) is submerged for 30m in dichloromethane at a specified temperature to check that the material is not affected at that temperature.

Products to test

Plastics piping systems for civil works for water in:

  • Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly (vinyl chloride) (PVC-U) EN ISO 1452-1, -2, -3, -5.
  • Drainage and sewerage without pressure made of unplasticized poly (vinyl chloride) (PVC-U) EN 1401-1.
  • Drainage and sewerage without pressure (structured wall) made of unplasticized poly (vinyl chloride) (PVC-U) EN 13476-1.
  • Conveyance of water under pressure made of oriented unplasticized Poly (vinyl chloride) (PVC-O) ISO 16422
  • Supply of buried and above ground drainage, sewerage and irrigation water under pressure – Oriented unplasticized poly(vinyl chloride) (PVC-O) UNE EN 17176-2, -5 / UNE-CEN/TS 17176-3.

Plastics piping systems for building and discharge of waste water made of:

  • Unplasticized poly (vinyl chloride) (PVC-U) EN 1329-1.
  • Unplasticized poly (vinyl chloride) (PVC-U) (structured wall) EN 1453-1

La entrada Dichloromethane resistance at specified temperature (DCMT) se publicó primero en CEISLAB.

]]> Determination of opacity. https://www.ceislab.com/en/ensayos/determination-of-opacity/ Thu, 18 Nov 2021 13:55:38 +0000 /?post_type=ensayos&p=4208 Test methods The diffused and non-diffused luminous energy from 540nm to 560nm is measured through a sample (pipe or accessory), expressed as a percentage of the inciding light energy. Products to test Plastics piping systems for civil works for water in: Piping systems for water supply and for buried and above-ground drainage and sewerage under […]

La entrada Determination of opacity. se publicó primero en CEISLAB.

]]> Test methods

The diffused and non-diffused luminous energy from 540nm to 560nm is measured through a sample (pipe or accessory), expressed as a percentage of the inciding light energy.

Products to test

Plastics piping systems for civil works for water in:

  • Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly (vinyl chloride) (PVC-U) EN ISO 1452-1, -2, -3, -5.
  • Conveyance of water under pressure made of oriented unplasticized Poly (vinyl chloride) (PVC-O) ISO 16422
  • Supply of buried and above ground drainage, sewerage and irrigation water under pressure – Oriented unplasticized poly(vinyl chloride) (PVC-O) UNE EN 17176-2, -5 / UNE-CEN/TS 17176-3.

Plastics piping systems for hot and cold water in buildings made of:

  • Polypropylene (PP) EN ISO 15874-1, -2, -3, -5
  • Reticulated polyethylene (PE-X) EN ISO 15875-1, -2, -3, -5
  • Polybutylene (PP) EN ISO 15876-1, -2, -3, -5
  • Chlorinated poly (vinyl chloride) (PVC-C) EN ISO 15877-1, -2, -3, -5
  • Multilayer EN ISO 21003-1, -2, -3, -5
  • Raised temperature resistance (PE-RT) EN ISO 22391-1, -2, -3, -5

La entrada Determination of opacity. se publicó primero en CEISLAB.

]]> Visually assessing the effects of heating. https://www.ceislab.com/en/ensayos/visually-assessing-the-effects-of-heating/ Thu, 18 Nov 2021 13:53:42 +0000 /?post_type=ensayos&p=4206 Test methods A sample (accessory) is heated in an oven for a set period of time at a set temperature, depending on the material used and the sample thickness. The appearance of the sample is examined after the test. Products to test Plastics piping systems for civil works for water in: Piping systems for water […]

La entrada Visually assessing the effects of heating. se publicó primero en CEISLAB.

]]> Test methods

A sample (accessory) is heated in an oven for a set period of time at a set temperature, depending on the material used and the sample thickness. The appearance of the sample is examined after the test.

Products to test

Plastics piping systems for civil works for water in:

  • Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly (vinyl chloride) (PVC-U) EN ISO 1452-1, -2, -3, -5.
  • Drainage and sewerage without pressure made of unplasticized poly (vinyl chloride) (PVC-U) EN 1401-1.
  • Drainage and sewerage without pressure (structured wall) made of unplasticized poly (vinyl chloride) (PVC-U) EN 13476-1.
  • Buried drainage and sewage without pressure (structured wall) made of Polyethylene (PE) EN 13476-1, -2, -3.
  • Buried drainage and sewage without pressure (structured wall) made of Polypropylene (PE) EN 13476-1, -2, -3.

Plastic piping systems for hot and cold water installations inside buildings made of Poly (vinyl chloride) (PVC-C) EN ISO 15877-1, -2, -3, -5

Plastics piping systems for building and discharge of waste water made of:

  • Unplasticized poly (vinyl chloride) (PVC-U) EN 1329-1.
  • Polypropylene (PP) EN 1451-1

La entrada Visually assessing the effects of heating. se publicó primero en CEISLAB.

]]> Vicat softening temperature https://www.ceislab.com/en/ensayos/vicat-softening-temperature/ Thu, 18 Nov 2021 13:50:29 +0000 /?post_type=ensayos&p=4203 The temperature at which a standard penetrator at a force of 50N penetrates 1 mm into the surface of a sample (pipe or accessory) when the temperature is raised at a constant speed. Products to test Plastics piping systems for civil works for water in: Piping systems for water supply and for buried and above-ground […]

La entrada Vicat softening temperature se publicó primero en CEISLAB.

]]> The temperature at which a standard penetrator at a force of 50N penetrates 1 mm into the surface of a sample (pipe or accessory) when the temperature is raised at a constant speed.

Products to test

Plastics piping systems for civil works for water in:

  • Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly (vinyl chloride) (PVC-U) EN ISO 1452-1, -2, -3, -5.
  • Drainage and sewerage without pressure made of unplasticized poly (vinyl chloride) (PVC-U) EN 1401-1.
  • Drainage and sewerage without pressure (structured wall) made of unplasticized poly (vinyl chloride) (PVC-U) EN 13476-1.
  • Conveyance of water under pressure made of oriented unplasticized Poly (vinyl chloride) (PVC-O) ISO 16422
  • Water supply of buried and above ground drainage, sewerage and irrigation water under pressure – Oriented unplasticized poly(vinyl chloride) (PVC-O) UNE EN 17176-2, -5 / UNE-CEN/TS 17176-3.

Plastic piping systems for hot and cold water installations inside buildings made of Poly (vinyl chloride) (PVC-C) EN ISO 15877-1, -2, -3, -5

Plastics piping systems for building and discharge of waste water made of:

  • Unplasticized poly (vinyl chloride) (PVC-U) EN 1329-1.
  • Unplasticized poly (vinyl chloride) (PVC-U) (structured wall) EN 1453-1

La entrada Vicat softening temperature se publicó primero en CEISLAB.

]]> Longitudinal reversion. Oven air method. https://www.ceislab.com/en/ensayos/longitudinal-reversion-oven-air-method/ Thu, 18 Nov 2021 13:44:20 +0000 /?post_type=ensayos&p=4199 Test methods The reversion of a pipe sample is calculated under set time and temperature conditions and this is expressed as a percentage in the variation compared to the initial length. The absence of any changes to the appearance after heating is also verified. Products to test Plastics piping systems for civil works for water […]

La entrada Longitudinal reversion. Oven air method. se publicó primero en CEISLAB.

]]> Test methods

The reversion of a pipe sample is calculated under set time and temperature conditions and this is expressed as a percentage in the variation compared to the initial length. The absence of any changes to the appearance after heating is also verified.

Products to test

Plastics piping systems for civil works for water in:

  • Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly (vinyl chloride) (PVC-U) EN ISO 1452-1, -2, -3, -5.
  • Drainage and sewerage without pressure made of unplasticized poly (vinyl chloride) (PVC-U) EN 1401-1.
  • Drainage and sewerage without pressure (structured wall) made of unplasticized poly (vinyl chloride) (PVC-U) EN 13476-1.
  • Conveyance of drainage and sewerage under pressure made of Polyethylene (PE) EN 12201-1, -2, -3, -5 / ISO 4427.
  • Buried drainage and sewage without pressure (structured wall) made of Polyethylene (PE) EN 13476-1, -2, -3.
  • Buried drainage and sewage without pressure (structured wall) made of Polypropylene (PE) EN 13476-1, -2, -3.
  • Conveyance of water under pressure made of oriented unplasticized Poly (vinyl chloride) (PVC-O) ISO 16422
  • Supply of buried and above ground drainage, sewerage and irrigation water under pressure – Oriented unplasticized poly(vinyl chloride) (PVC-O) UNE EN 17176-2, -5 / UNE-CEN/TS 17176-3.

Plastics piping systems for hot and cold water in buildings made of:

  • Polypropylene (PP) EN ISO 15874-1, -2, -3, -5
  • Reticulated polyethylene (PE-X) EN ISO 15875-1, -2, -3, -5
  • Polybutylene (PP) EN ISO 15876-1, -2, -3, -5
  • Chlorinated poly (vinyl chloride) (PVC-C) EN ISO 15877-1, -2, -3, -5
  • Raised temperature resistance (PE-RT) EN ISO 22391-1, -2, -3, -5

Plastics piping systems for building and discharge of waste water made of:

  • Unplasticized poly (vinyl chloride) (PVC-U) EN 1329-1.
  • Unplasticized poly (vinyl chloride) (PVC-U) (structured wall) EN 1453-1
  • Polypropylene (PP) EN 1451-1

Plastics piping systems for civil works for gaseous fuels. Polyethylene (PE).(EN 1555-1, -2, -5 / ISO 4437)

La entrada Longitudinal reversion. Oven air method. se publicó primero en CEISLAB.

]]> Determination of the oxidation induction time. https://www.ceislab.com/en/ensayos/determination-of-the-oxidation-induction-time/ Thu, 18 Nov 2021 13:41:53 +0000 /?post_type=ensayos&p=4195 Test methods A sample is heated in an inert gaseous atmosphere until a set temperature is achieved. Air is then allowed to pass through and the temperature is maintained constant for a given time or until the oxidation reaction takes place. Products to test Plastics piping systems for civil works for water in: Conveyance of […]

La entrada Determination of the oxidation induction time. se publicó primero en CEISLAB.

]]> Test methods

A sample is heated in an inert gaseous atmosphere until a set temperature is achieved. Air is then allowed to pass through and the temperature is maintained constant for a given time or until the oxidation reaction takes place.

Products to test

Plastics piping systems for civil works for water in:

  • Conveyance of drainage and sewerage under pressure made of Polyethylene (PE) EN 12201-1, -2, -3, -5 / ISO 4427.
  • Buried drainage and sewage without pressure (structured wall) made of Polyethylene (PE) EN 13476-1, -2, -3.
  • Buried drainage and sewage without pressure (structured wall) made of Polypropylene (PE) EN 13476-1, -2, -3.

Plastics piping systems for building and discharge of waste water made Polypropylene (PP) EN 1451-1

Plastics piping systems for civil works for gaseous fuels. Polyethylene (PE).(EN 1555-1, -2, -5 / ISO 4437)

La entrada Determination of the oxidation induction time. se publicó primero en CEISLAB.

]]> Determination of the melt mass-flow rate (MFR) of thermoplastics. https://www.ceislab.com/en/ensayos/determination-of-the-melt-mass-flow-rate-mfr-of-thermoplastics-2/ Thu, 18 Nov 2021 13:39:27 +0000 /?post_type=ensayos&p=4192 Test methods The sample is subjected to melting and extrusion in a measuring cylinder through a specific longitude and diameter matrix under predefined temperature and load conditions. The extrusion speed result is expressed in g/10 min. Products to test Plastics piping systems for civil works for water in: Conveyance of drainage and sewerage under pressure […]

La entrada Determination of the melt mass-flow rate (MFR) of thermoplastics. se publicó primero en CEISLAB.

]]> Test methods

The sample is subjected to melting and extrusion in a measuring cylinder through a specific longitude and diameter matrix under predefined temperature and load conditions. The extrusion speed result is expressed in g/10 min.

Products to test

Plastics piping systems for civil works for water in:

  • Conveyance of drainage and sewerage under pressure made of Polyethylene (PE) EN 12201-1, -2, -3, -5 / ISO 4427.
  • Buried drainage and sewage without pressure (structured wall) made of Polyethylene (PE) EN 13476-1, -2, -3.
  • Buried drainage and sewage without pressure (structured wall) made of Polypropylene (PE) EN 13476-1, -2, -3.

Plastics piping systems for hot and cold water in buildings made of:

  • Polypropylene (PP) EN ISO 15874-1, -2, -3, -5
  • Polybutylene (PP) EN ISO 15876-1, -2, -3, -5

Plastics piping systems for building and discharge of waste water made Polypropylene (PP) EN 1451-1.

Plastics piping systems for civil works for gaseous fuels.Polyethylene (PE).(EN 1555-1, -2, -5 / ISO 4437).

Recycled plastics

  • Polyethylene UNE 53978/EN 15344
  • Polypropylene UNE 53972/EN 15345
  • Polystyrene UNE 15342/ UNE EN 15342

La entrada Determination of the melt mass-flow rate (MFR) of thermoplastics. se publicó primero en CEISLAB.

]]> Determination of processing temperature https://www.ceislab.com/en/ensayos/determination-of-processing-temperature/ Thu, 18 Nov 2021 13:35:37 +0000 /?post_type=ensayos&p=4188 Test methods The sample is subjected to a heating curve in differential scanning calorimetry equipment. Analysis of the thermogram shows the material processing temperature. Products to test Plastics piping systems for civil works for water in: Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly (vinyl […]

La entrada Determination of processing temperature se publicó primero en CEISLAB.

]]> Test methods

The sample is subjected to a heating curve in differential scanning calorimetry equipment. Analysis of the thermogram shows the material processing temperature.

Products to test

Plastics piping systems for civil works for water in:

  • Piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly (vinyl chloride) (PVC-U) EN ISO 1452-1, -2, -3, -5.
  • Drainage and sewerage without pressure made of unplasticized poly (vinyl chloride) (PVC-U) EN 1401-1.
  • Drainage and sewerage without pressure (structured wall) made of unplasticized poly (vinyl chloride) (PVC-U) EN 13476-1.
  • Buried drainage and sewage without pressure (structured wall) made of Polyethylene (PE) EN 13476-1, -2, -3.
  • Buried drainage and sewage without pressure (structured wall) made of Polypropylene (PE) EN 13476-1, -2, -3.
  • Conveyance of water under pressure made of oriented unplasticized Poly (vinyl chloride) (PVC-O) ISO 16422
  • Supply of buried and above ground drainage, sewerage and irrigation water under pressure – Oriented unplasticized poly(vinyl chloride) (PVC-O) UNE EN 17176-2, -5 / UNE-CEN/TS 17176-3.

Plastics piping systems for building and discharge of waste water made of:

  • Unplasticized poly (vinyl chloride) (PVC-U) EN 1329-1.
  • Unplasticized poly (vinyl chloride) (PVC-U) (structured wall) EN 1453-1

La entrada Determination of processing temperature se publicó primero en CEISLAB.

]]> Oven test. https://www.ceislab.com/en/ensayos/oven-test/ Tue, 02 Nov 2021 11:03:25 +0000 /?post_type=ensayos&p=3654 Test methods A sample (pipe) is heated in an oven for a set period of time at a set temperature. The appearance of the sample is examined after the test. Products to test Plastics piping systems for non-pressure underground drainage and sewerage (structured-wall) piping systems of unplasticized poly(vinyl chloride) (PVC-U) EN 13476-1, -2, -3

La entrada Oven test. se publicó primero en CEISLAB.

]]> Test methods

A sample (pipe) is heated in an oven for a set period of time at a set temperature. The appearance of the sample is examined after the test.

Products to test

Plastics piping systems for non-pressure underground drainage and sewerage (structured-wall) piping systems of unplasticized poly(vinyl chloride) (PVC-U) EN 13476-1, -2, -3

La entrada Oven test. se publicó primero en CEISLAB.

]]>